FloPlast 50mm Anthracite Grey MiniFlo Downpipe Offset Bend - 92.5°
Product code: 293625
The FloPlast MiniFlo Downpipe Offset Bend is used for for making a 92.5° swan neck / offset from downpipe outlet to the wall. A smaller profile based on the original round line system, it is an ideal solution for garages, sheds, summerhouses and most garden buildings.
Read more
Read less
Saved to Project List
FloPlast 50mm Anthracite Grey MiniFlo Downpipe Offset Bend - 92.5°
added to "My Project List".
You are not logged in to save your list permanently. Until you log in, your list will be saved temporarily and can only be accessed from the device you are using now.
Product details
- Standards Met: BS EN 607 & BS EN 12200
- Pipe Shape: MiniFlo
- Gutter Size: Mini
- Drainage Section: Downpipe
- Product Type: Fittings
- Diameter: 50 mm
- Material: PVCu
- Colour: Anthracite grey
- Pack Quantity: 1
- Years Guaranteed: 10
- Certifications Met: KM501316
- Type: Offset bends
- Manufacturer Model No: RBM1AG
- Brand Name: FloPlast
Features & benefits
- Manufactured in the UK from durable, lightweight PVCu
- This system is not compatible with other systems in the market place
- The lower end of the swan neck/offset should be secured with a 431804 pipe clip. The pipe clip should be located on the joint between the offset bend and downpipe, using two 32mm x 6.5mm screws
- Easy to install